Slot V Pro

Accessories ASUS offers different kinds of motherboard accessories including Thunderbolt™ expansion cards, M.2 add-on cards, and fan extension cards give DIY PC users better choices when it comes to building their perfect workstation or gaming rig. .1: The PCIe x163 slot shares bandwidth with PCIe x11 slot, PCIe x12 slot, USB334 and eSATA. The PCIe x163 default setting is in x1 mode.2: These SATA ports are for data hard drivers only. ATAPI devices are not supported. The iPhone 12 Pro starts from $999 for the 128GB version, while upgrades to 256GB or 512GB will cost you $1,099 or $1,299, respectively. Overall winner: iPhone 12 Pro. ASUS P8Z68-V PRO: Overview This board from ASUS is a great all-round performer, compared to the P67 boards we have reviewed—space for tri-GPU setups, six fan headers with good OS fan controls. Why I needed some way to prevent dust from depositing within the v-slots. The original profile fits the slots perfectly! However, I needed more sizes. The following combination should be enough to cover most of the top-facing and front-facing slots of a Ender 3 Pro. How it works Measure twice! Those measures fit an Ender 3 Pro.

Slot 1 refers to the physical and electrical specification for the connector used by some of Intel's microprocessors, including the Pentium Pro, Celeron, Pentium II and the Pentium III. Both single and dual processor configurations were implemented.

Intel switched back to the traditional socket interface with Socket 370 in 1999.

General[edit]

With the introduction of the Pentium II CPU, the need for greater access for testing had made the transition from socket to slot necessary. Previously with the Pentium Pro, Intel had combined processor and cache dies in the same Socket 8 package. These were connected by a full-speed bus, resulting in significant performance benefits. Unfortunately, this method required that the two components be bonded together early in the production process, before testing was possible. As a result, a single, tiny flaw in either die made it necessary to discard the entire assembly, causing low production yield and high cost.^{[citation needed]}

Intel subsequently designed a circuit board where the CPU and cache remained closely integrated, but were mounted on a printed circuit board, called a Single-Edged Contact Cartridge (SECC). The CPU and cache could be tested separately, before final assembly into a package, reducing cost and making the CPU more attractive to markets other than that of high-end servers. These cards could also be easily plugged into a Slot 1, thereby eliminating the chance for pins of a typical CPU to be bent or broken when installing in a socket.

The form factor used for Slot 1 was a 5-inch-long, 242-contact edge connector named SC242. To prevent the cartridge from being inserted the wrong way, the slot was keyed to allow installation in only one direction. The SC242 was later used for AMD's Slot A as well, and while the two slots were identical mechanically, they were electrically incompatible. To discourage Slot A users from trying to install a Slot 1 CPU, the connector was rotated 180 degrees on Slot A motherboards.

With the new Slot 1, Intel added support for symmetric multiprocessing (SMP). A maximum of two Pentium II or Pentium III CPUs can be used in a dual slot motherboard. The Celeron does not have official SMP support.

There are also converter cards, known as Slotkets, which hold a Socket 8 so that a Pentium Pro CPU can be used with Slot 1 motherboards.^[2] These specific converters, however, are rare. Another kind of slotket allows using a Socket 370 CPU in a Slot 1. Many of these latter devices are equipped with own voltage regulator modules, in order to supply the new CPU with a lower core voltage, which the motherboard would not otherwise allow.

Form factors[edit]

The Single Edge Contact Cartridge, or 'SECC', was used at the beginning of the Slot 1-era for Pentium II CPUs. Inside the cartridge, the CPU itself is enclosed in a hybrid plastic and metal case. The back of the housing is plastic and has several markings on it: the name, 'Pentium II'; the Intel logo; a hologram; and the model number. The front consists of a black anodized aluminum plate, which is used to hold the CPU cooler. The SECC form is very solid, because the CPU itself is resting safely inside the case. As compared to socket-based CPUs, there are no pins that can be bent, and the CPU is less likely to be damaged by improper installation of a cooler.

Following SECC, the SEPP-form (Single Edge Processor Package) appeared on the market. It was designed for lower-priced Celeron CPUs. This form lacks a case entirely, consisting solely of the printed-circuit board holding the components.

A form factor called SECC2 was used for late Pentium II and Pentium III CPUs for Slot 1, which was created to accommodate the switch to flip chip packaging.^[3] Only the front plate was carried over, the coolers were now mounted straight to the PCB and exposed CPU die and are, as such, incompatible with SECC cartridges.

History[edit]

Historically, there are three platforms for the Intel P6-CPUs: Socket 8, Slot 1 and Socket 370.

Slot 1 is a successor to Socket 8. While the Socket 8 CPUs (Pentium Pro) directly had the L2-cache embedded into the CPU, it is located (outside of the core) on a circuit board shared with the core itself. The exception is later Slot 1 CPUs with the Coppermine core which have the L2-Cache embedded into the die.

In the beginning of 2000, while the Pentium-III-CPUs with FC-PGA-housing appeared, Slot 1 was slowly succeeded by Socket 370, after Intel had already offered Socket 370 and Slot 1 at the same time since the beginning of 1999. Socket 370 was initially made for the low-cost Celeron processors, while Slot 1 was thought of as a platform for the expensive Pentium II and early Pentium III models. Cache and core were both embedded into the die.

Slot 1 also obsoleted the old Socket 7, at least regarding Intel, as the standard platform for the home-user. After superseding the Intel P5Pentium MMX CPU, Intel completely left the Socket 7 market.

Chipsets and officially supported CPUs^[4][5][edit]

Intel 440FX ^[6][edit]

• Introduced in: May 6, 1996
• FSB: 66 MHz
• PIO/WDMA
• Supported RAM type: EDO-DRAM
• Supported CPUs:
  • Pentium II with 66 MHz FSB
  • Celeron (Covington, Mendocino)
• Used in both Socket 8 (Pentium Pro) and Slot 1 (Pentium II, early Celerons)
• Does not support AGP or SDRAM
• Allowed up to two CPUs for SMP

Intel 440LX ^[7][edit]

• Introduced in: August 27, 1997
• FSB: 66 MHz
• Supported RAM type: EDO-DRAM, SDRAM
• Supported CPUs: Pentium II, Celeron
• AGP 2× Mode
• UDMA/33
  • Pentium II with 66 MHz FSB
  • Celeron (Covington, Mendocino)
• Introduced support for AGP and SDRAM
• Allowed up to two CPUs for SMP

Intel 440EX ^[8][edit]

• Introduced in: April, 1998
• FSB: 66 MHz
• Supported RAM type: EDO-DRAM, SDRAM
• Supported CPUs: Pentium II, Celeron
• AGP 2× Mode
• UDMA/33
  • Pentium II with 66 MHz FSB
  • Celeron (Covington, Mendocino)
• Same specifications as 440LX, but memory support limited to 256MB and no SMP support.

Intel 440BX ^[9][edit]

• Introduced in: April 1998
• FSB: 66 and 100 MHz (some motherboards supported overclocking to 133 MHz, allowing usage of Socket 370 CPUs using a Slocket)
• AGP 2× Mode (max memory mapping 32 or 64 MB)
• UDMA/33
• Supported RAM types: SDRAM (PC66 and PC100, PC133 with overclocking) up to 4 DIMMs of 256 MB
• Supported CPUs:
  • Pentium II with 66 and 100 MHz FSB
  • Pentium III with 100 MHz FSB (133 with overclocking)
  • Celeron (Covington, Mendocino, Coppermine)
• Allowed up to two CPUs for SMP

Intel 440ZX[edit]

• Introduced in: November 1998
• FSB: 66 and 100 MHz (some motherboards supported overclocking to 133 MHz, allowing usage of Socket 370 CPUs using a Slocket)
• AGP 2× Mode
• UDMA/33
• Supported RAM types: SDRAM (PC66 and PC100, PC133 with overclocking)
• Supported CPUs:
  • Pentium II with 66 and 100 MHz FSB
  • Pentium III with 100 MHz FSB (133 with overclocking)
  • Celeron (Covington, Mendocino, Coppermine)

Intel 820/820E (Camino)[edit]

• Introduced in: November 1999
• FSB: 66, 100, and 133 MHz
• AGP 4× Mode
• UDMA/66 (i820), UDMA/100 (i820E)
• Supported RAM types: RDRAM, SDRAM (PC133)
• Supported CPUs: All Slot 1 CPUs
• Allowed up to two CPUs for SMP

Via Apollo Pro / Pro+[edit]

• Introduced in: May 1998 (Pro Plus: Dec 1998)
• FSB: 66, 100 MHz (some motherboards supported overclocking to 133 MHz, allowing usage of Socket 370 CPUs using a Slocket)
• AGP 2× Mode
• UDMA/33 (VT82C586B/VT82C596A), UDMA/66 (VT82C596B)
• Supported CPUs:
  • Pentium Pro with 66 MHz FSB
  • Pentium II with 66 and 100 MHz FSB
  • Pentium III with 100 MHz FSB (133 with overclocking)
  • Celeron (Covington, Mendocino, Coppermine)

Via Apollo Pro 133[edit]

• Introduced in: July 1999
• FSB: 66, 100, and 133 MHz
• AGP 2× Mode
• UDMA/33 (VT82C596A), UDMA/66 (VT82C596B/VT82C686A), UDMA/100 (VT82C686B)
• Supported CPUs: All Slot 1 CPUs

Via Apollo Pro 133A[edit]

• Introduced in: Oct 1999
• FSB: 66, 100, and 133 MHz
• AGP 4× Mode
• UDMA/66 (VT82C596B/VT82C686A), UDMA/100 (VT82C686B)
• Supported CPUs: All Slot 1 CPUs
• Allowed up to two CPUs for SMP

See also[edit]

References[edit]

1. ^'CPU Sockets Chart'. erols.com. Retrieved 2009-03-31.
2. ^'PPro on a BX?-Usenet Gateway'.
3. ^http://www.tomshardware.com/reviews/overclocking-special,94-2.html^{[dead link]}
4. ^List of Intel chipsets
5. ^List of VIA chipsets
6. ^Intel Corporation: 440FX PCIset Datasheet
7. ^Intel Corporation: 440LX AGPset Design Guide^{[permanent dead link]}
8. ^Intel Corporation: 440EX AGPset Design Guide
9. ^Intel Corporation: 440BX AGPset Design GuideArchived 2012-10-04 at the Wayback Machine

External links[edit]

• Intel's specifications for the SC242 connectors^{[permanent dead link]}

Surface Pro 3 adapts to the way you work.

Surface Pro 3 and Windows

Surface Pro 3 comes with Windows 8.1 Pro edition (for commercial customers), which includes BitLocker data protection, domain join, and Remote Desktop Connection hosting.

Not sure which version of Windows you have? See Which version of Windows operating system am I running?

If you're not sure which Surface model you're using, see Find out which Surface model you have.

Diagram of Surface Pro 3

Not sure where to plug something in or turn up the volume? To help you get around, here's a diagram.

1. Volume

2. Headset jack

3. Speaker

4. Power

5. Front camera

6. Front privacy light

7. Front microphone

8. Mini DisplayPort

9. Full-size USB 3.0 port

10. Kickstand

11. Windows button

12. Charging port

13. Pen

Surface Pro 3 features

Work your way

Flip out the Surface Pro 3 kickstand to any angle and work or play comfortably at your desk, on the couch, or while giving a hands-free presentation. Choose the angle that's right for you. Multi-touch lets you use your fingers to select, zoom, or move things around on the screen (learn about using a touchscreen).

Surface Pro 3 supports standard Wi-Fi protocols (802.11a/b/g/n/ac) and Bluetooth®, and it has the ports you expect in a full-feature laptop.

• Full-size USB 3.0 port. Connect USB accessories—like a mouse, a printer, a 4G USB dongle, or an Ethernet adapter.

• microSD card slot. Use the microSD card slot for extra storage or transferring files. Learn more about Surface storage options.

• Mini DisplayPort version 1.2. Share what's on your Surface display by connecting it to an HDTV, monitor, or projector (video adapters sold separately). Learn more about connecting Surface to a TV, monitor, or projector.

• Charging port and 36-watt power supply. Attach the included power supply to the charging port when your battery is low. Learn more about Surface battery and power.

• Cover port. Add Type Cover for Surface Pro 3 (sold separately) so you'll always have a keyboard with you. Thin and light, Type Cover even helps protect your touchscreen while you're on the go. For more info, see Surface Type Cover.

Next-gen power for your ideas

Surface Pro 3 uses the 4th generation Intel® Core™ processor (i3, i5 or i7). Choose from 64GB or 128GB storage with 4GB RAM, or 256GB or 512GB storage with 8GB RAM. Want even more storage? Learn more about Surface storage options.

Express yourself

V Slot Projects

Music, podcasts, and audio books sound crisp and clear with Dolby® enhanced sound. Need a bit more privacy? Plug your favorite headset into the headset jack. When you’re on your next call or making your next video, take advantage of the noise-cancelling stereo headphones. See Surface sound, volume, and audio accessories for more info.

And for both videos and photos, you’ll have two 5-megapixel cameras. Each camera has a privacy light, so there are no surprises. For more info, see Take photos and videos with Surface.

Make it your own

Learn about the optional accessories that work with your Surface Pro 3.

To take full advantage of all your Surface can do, you can download apps that use the four available sensors (compass, ambient light sensor, accelerometer, and gyroscope). If you want to learn more about Surface Pro 3, download the User Guide for your Surface (English only).

Hardware specifications

¹ Testing conducted by Microsoft in March 2015 using 64 GB and 128 GB units with 4 GB RAM. Testing consisted of full battery discharge during video playback. All settings were default except: Wi-Fi was associated with a network and Auto-Brightness was disabled. Battery life varies significantly with settings, usage, and other factors.

Slot V Promo Code

² System software uses significant storage space. Available storage is subject to change based on system software updates and apps usage. 1 GB = 1 billion bytes. See Surface.com/storage for more details.

Slot V Promo Code

³ Maximum display output from the Mini DisplayPort depends on the refresh rate and the screen resolution. For more info, see Troubleshoot connecting Surface to a second screen.

V-slot Profile Europe

Coverage, service, and 4G LTE are not available everywhere.

Related topics